TM-9-2815-225-34-P
ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2005
TM-9-2815-225-34-P - Page 89 of 736
TM 9-2815-225-34&P
0007 00
0007 00-11/12 blank
BIG CAM I ENGINE REMOVAL (Contd)
Figure 12. Engine Removal.
END OF WORK PACKAGE
18
17
16
32
31
35
30
33
34
38
26
25
29
28
27
23
22
20
21
19
24
LIFTING
DEVICE
LIFTING
SLING
15
14
47.
Remove two front frame flat washers (20) and front vibration insulators (21) from front engine
crossmember (25).
48.
Using lifting device and lifting sling, remove engine (18) from frame (32). Ensure there is proper
clearance between frame (32), alternator (28), engine (18), and power steering pump (22).
49.
Install engines in approved engine container.
36
37
Back to Top
