TM-9-2815-225-34-P
ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2005
TM-9-2815-225-34-P - Page 84 of 736
TM 9-2815-225-34&P
0007 00
0007 00-6
BIG CAM I ENGINE REMOVAL (Contd)
15.
Disconnect engine harness electrical connectors (1) at firewall (2).
16.
Remove engine harness screw (3) and engine harness bracket (4) from engine (5).
17.
Disconnect air compressor line (6) from air compressor (7).
18.
Disconnect fuel line (10) from fuel filter and damper (11).
19.
Disconnect tachometer shaft assembly (15) from tachometer (14).
20.
Cut plastic tie (9) securing tachometer shaft assembly (15) to ether quick start kit bracket (8).
Discard plastic tie (9).
21.
Remove ether quick start kit bracket nut (17), screw (12), two clamps (13) and (16) and ether
quick start kit bracket (8) from engine (5).
22.
Cut plastic tie (21) securing speedometer shaft assembly (22) to fuel return line (20). Discard
plastic tie (21).
23.
Disconnect fuel return line (20) from fuel rail male branch tree (19).
24.
Disconnect air compressor hose (23) from air compressor line (24).
25.
Disconnect air compressor line (25) from air compressor line T-adapter (18).
Figure 5. Firewall Electrical Harness Disconnections.
1
2
5
3
4
Back to Top
