TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 142 of 736

TM 9-2815-225-34&P

0010 00

0010 00-12

ENGINE ACCESSORIES REMOVAL (Contd)

OIL PUMP (Contd)

NOTE

Perform steps 7 through 13 for Big Cam I.

7.

Remove bolt (14), lockwasher (13), washer (12), clamp (11), spacer (10), and locknut (15) securing

oil suction hose (5) to bracket (9). Discard lockwasher (13) and locknut (15).

8.

Remove bolt (17), lockwasher (16), and bracket (9) from oil pan (21) and cylinder block (1).

Discard lockwasher (16).

9.

Remove two screws (6), lockwashers (7), oil suction hose (5), and gasket (8) from oil pan (21).

Discard lockwashers (7) and gasket (8).

10.

Remove oil suction hose (5) and adapter (4) from cylinder block (1).

11.

Remove three long bolts (18), two short bolts (20), and five lockwashers (19) securing oil pump (3)

to accessory drive housing (22). Discard lockwashers (19).

12.

Remove oil pump (3) and gasket (2) from accessory drive housing (22). Discard gasket (2).

13.

For oil pump repair, refer to WP 0023 00.