TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 144 of 736

TM 9-2815-225-34&P

0010 00

0010 00-14

ENGINE ACCESSORIES REMOVAL (Contd)

AIR AFTERCOOLER

NOTE

Perform steps 1 and 2 for Big Cam I only.

1.

Remove three bolts (5), lockwashers (4), and washers (3) securing air aftercooler (2) to cylinder

heads (1). Discard lockwashers (4).

2.

Remove six bolts (7) and washers (6) securing air aftercooler (2) to cylinder heads (1).

NOTE

Perform steps 3 through 6 for Big Cam III only.

3.

Remove screw (8), lockwasher (4), and washer (3) securing air aftercooler (2) to cylinder

heads (1). Discard lockwasher (4).

4.

Remove two screws (5), lockwashers (4), and washers (3) securing air aftercooler (2) to cylinder

heads (1). Discard lockwashers (4).

5.

Remove six screws (7) and washers (6) securing air aftercooler (2) to cylinder heads (1).

6.

Remove air aftercooler (2) and three gaskets (9) from cylinder heads (1). Discard gaskets (9).

7.

For air aftercooler repair, refer to WP 0024 00.