TM-9-2910-226-34
PUMP, FUEL, METERING AND DISTRIBUTING, ASSEMBLY
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT, MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS
JUNE 1974
TM-9-2910-226-34 - Page 41 of 208
TM 9-2910-226-34
CHAPTER 2
DIRECT SUPPORT AND GENERAL SUPPORT
MAINTENANCE INSTRUCTIONS
Section I. REPAIR PARTS, SPECIAL TOOLS, AND EQUIPMENT
2-1. General.
Special tools, equipment and main-
tenance parts over and above those available to the
using organization are supplied to direct support and
general support maintenance units for maintaining
and repairing the fuel injection pump.
2-2. Repair Parts.
Repair parts for the metering and
distributing fuel injection pump are listed in ap-
pendix B.
2-3. Common Tools and Equipment.
Standard and
commonly used tools and equipment having general
application to this material are authorized by tables
of allowances (TA) and table of organization and
equipment (TOE).
2-4. Special Tools and Equipment.
The special tools
illustrated in figure B-10 and listed in table 2-1 are
those tools necessary
to perform operations
described in this manual.
2-5. Improvised Tools.
Refer to figure 2-1 which
illustrates an improvised tool used for setting the
smoke limit cam angle.
Tool Dimensions
Gap
Tool
Outer
Inner
1
0.030
0.110
2
0.040
0.110
3
0.050
0.110
2-1
Back to Top
