TM-9-2920-225-34

GENERATOR ASSEMBLY; PRESTOLITE AMA-5102UT; LEECE-NEVILLE 3002AC, 3002AD, 3002AE, 5504AA, 5504AB, 2184AC, 5300GP

TECHNICAL MANUAL; MAINTENANCE; DIRECT AND GENERAL SUPPORT LEVEL

FEBRUARY 1981

TM-9-2920-225-34 - Page 193 of 262

TM 9-2920-225-34

NOTE

If end bell is damaged or is not within limits given in

tables 2-8 and 2-9, generator is nonrepairable.

1.

Check that drive end bell (1) is not cracked, bent or warped.

2.

Measure inside diameter of drive end bell (1) bearing bore ( 2).

NOTE

When working on models 5504AA and 5504AB, if any part

of drive assembly is damaged, generator is nonrepairable.

3.

Check that block holder ( 3), retaining ring (4), drive blocks (5), drive

shaft (6), and coupling cover ( 7) are not bent, broken cracked or warped.

GO TO FRAME 3

MODELS 5504AA AND 5504AB

MODEL 5300GP

TA 103675

Table 2-8. End Bell Housing (Models 5504AA and 5504AB) Wear Limits

Size and Fit

Index of New Parts Wear Limits

Number

Item /Point of Measurement (inches) (inches)

2

Inside diameter of drive end bell 2.0465 to 2.0468 None

bearing bore

Table 2-9. End Bell Housing (Model 5300GP) Wear Limits

Size

and Fit

Index of New Parts Wear Limits

Number

Item /Point of Measurement (inches) (inches)

2

Inside diameter of drive end bell 2.4407 to 2.4412 None

bearing bore

2-177