TM 9-2920-225-34
d.
Repair.
FRAME 1
1.
2.
Solder loose or broken connections on stator (1) and connector (2).
Retest stator (l) and connector (2) assembly after soldering. Refer to
2-20c. If continuity is not made between pins (3, 4, and 5), generator
nonrepairable. If there is ground between any pins (3 through 8) and
housing (1), generator is nonrepairable.
NOTE
Follow-on Maintenance Action Required:
1.
Replace drive end bell and rotor assembly. Refer
to para 2-19.
2.
Replace slipring end housing. Refer to para
2-18.
3.
Replace fan and hub assembly. Refer to para
2-17.
END OF TASK
para
is
TA 103683
2-186