TM 9-2920-225-34
2-20.
STATOR AND CONNECTOR ASSEMBLY.
TOOLS :
No
special tools required
SUPPLIES:
None
PERSONNEL:
One
EQUIPMENT CONDITION:
Generator removed from vehicle, pulley removed from
generator.
a. Preliminary Procedures.
(1) Clean outside of generator before disassembly. Refer to para l-3.
(2) Remove fan and hub assembly. Refer to para 2-17.
(3) Remove slipring end housing. Refer to para 2-18.
(4) Remove drive end bell and rotor assembly. Refer to para 2-19.
—
2-184