TM 9-2920-225-34
1.
Take rubber sealant off brush holder terminals (1).
2*
Take off nut (2) and lockwasher (3). Tag and take off terminal (1).
3.
Take off nut (4), lockwasher (5), and spacer (6).
4.
Take out brush holder ( 7), brush (8), preformed packings (9), and
screw with washer ( 10). Throw packings away.
5.
Do steps 2 through 4 again for other brush assembly.
GO TO FRAME 2
TA 103684
2-188