TM 9-2920-225-34
FRAME 2
1.
2.
3.
4.
Put block holder (1) on rotor shaft (2) with retaining ring (3).
Put two drive blocks (4) and drive shaft (5) in block holder (l).
Put coupling cover (6) in place. Put in six locking plates (7),
12 lockwashers (8), and 12 screws (9).
Bend tabs on six locking plates (7).
NOTE
Follow-on Maintenance Action Required:
1.
Replace slipring end housing. Refer to
para
2-18.
2.
Replace fan and hub assembly. Refer to para
2-17.
END OF TASK
TA 103681
2-182