TM 9-2920-225-34
Section VIII.
TESTS AND ADJUSTMENTS
1.
Place woodruff key (1) in shaft (2).
2.
Aline pulley keyway (3) with key (1). Push pulley (4) onto shaft (2).
3.
Put washer (5) on shaft (2) and put on nut (6).
4.
Place pulley (4) in vise with soft-jaw caps. Using torque wrench, tighten
nut (6) to 40 to 50 pound-feet.
5.
Take pulley (4) out of vise.
GO TO FRAME 2
TA 103527
2-214