TM 9-2920-225-34
1.
Swing pivot arm (1) to the right and aline three studs (2) with stud holes in
pivot arm. Let studs go into stud holes in pivot arm.
2.
Put mounting flange adapter (3) over studs in pivot arm (1). Put on 12 nuts
(4).
3.
Put key (5) in keyway (6) of pulley shaft (7). Slide pulley shaft onto driving
head (8). Slide pulley adapter (9) onto studs of adapter flange (3).
4.
Put on six nuts ( 10).
GO TO FRAME 3
TA 118943
2-215