TM-9-2920-242-35
STARTER, ENGINE ELECTRICAL, ASSEMBLY MODEL 1113943, 1113904 AND 1113944
TECHNICAL MANUAL; DIRECT SUPPORT, GENERAL SUPPORT AND DEPOT MAINTENANCE INCLUDING REPAIR PARTS
SEPTEMBER 1964
TM-9-2920-242-35 - Page 66 of 110
PAR. 41e
C 1, TM 9-2920-242-35
CHAPTER 8
REPAIR
Section I. DISASSEMBLY
46. Disassembly into Subassemblies
Refer to paragraph 18 and disassemble starter into
subassemblies.
47. Disassembly of Drive Housing
Refer to figure 52 and disassemble drive housing.
48. Disassembly of Commutator End Plate
Assembly
a.
Refer to figure 53 and disassemble the com-
mutator end plate assembly.
b.
Refer to figure 11 and disassemble the brush
holder assembly.
49. Disassembly of Lever Housing and Drive
Clutch Assembly
a. Disassembly of Lever Housing.
(1) Refer to figures 12 and 13 for removing
solenoid plunger,
shift lever, and shaft
from the lever housing.
(2) Refer to figure 54 for disassembly of lever
housing.
b. Disassembly of
assemble the drive
figures 15 and 16.
Drive Clutch Assembly.
Dis-
clutch assembly as shown in
Figure 52. Disassembling drive housing assembly.
57
Back to Top
