TM-9-2990-206-34P
TURBOSUPERCHARGER AlRESEARCH MODEL T18C01
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)
TM-9-2990-206-34P - Page 24 of 85
TM 9-2990-206-34&P
DISASSEMBLY-Continued.
REMOVE COMPRESSOR HOUSING
TOOLS:
Scriber
7/16 inch, 1/2 inch drive, deep socket
Socket wrench handle (speeder)
REMOVAL:
1. Using scriber, scribe alinement marks
on compressor housing (A), clamp (B),
and backplate (C). If your tur-
bosupercharger is a newer model,
alinement marks will be cast into the
flanges of the compressor and bearing
housings.
Take careful note of the
alinement marks to ensure proper
housing alinement during assembly.
2. Using 7/16 inch socket and speeder,
loosen nut (D) and move clamp (B)
toward center housing (E).
Lift compressor housing carefully
to prevent damage to compressor
wheel.
3. Remove compressor housing (A).
4. Remove and discard preformed packing
(“0” ring) (F).
5. Remove clamp (B).
TA293542
Change 1 3-3
CAUTIO N
Back to Top
