TM-9-2990-206-34P
TURBOSUPERCHARGER AlRESEARCH MODEL T18C01
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)
TM-9-2990-206-34P - Page 30 of 85
TM 9-2990-206-34&P
REMOVE RETAINING RINGS , THRUST WASHER, AND SLEEVE
BEARING
TOOLS :
Internal retaining ring pliers
REMOVAL:
1.
Using internal retaining ring pliers (A),
remove and discard retaining ring (B) from
housing bore.
2.
Turn center housing over ( 180° ). Using
retaining ring pliers (A), remove and dis-
card retaining ring (C) from housing bore.
3. Remove and discard thrust washer (D) from
housing bore.
4. Remove and discard sleeve bearing (E) from
housing bore.
5. Using retaining ring pliers, remove and
discard retaining ring (F) from housing
bore.
TA097815
3-9
DISASSEMBLY-Continued.
Back to Top
