TM-9-2990-206-34P
TURBOSUPERCHARGER AlRESEARCH MODEL T18C01
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LISTS)
TM-9-2990-206-34P - Page 25 of 85
TM 9-2990-206-34&P
DISASSEMBLY—Continued.
REMOVE HEAT SHIELD AND CENTER HOUSING
TOOLS :
Scriber
9/16 inch, double offset box wrench
REMOVAL :
1.
Using scriber,
center housing
2. On part number
scribe alinement marks on
(A) and turbine housing (B).
11669107-1 and 11669107-2
turbosuperchargers only, scribe alinement
marks on heat shield (D) and turbine housing
(B).
3. Using 9/16 inch double offset box wrench,
remove eight bolts and lockwashers (C).
4. Remove heat shield (D).
5.
Lift center housing (A) with compressor
wheel and turbine wheel from turbine hous-
ing (B).
6.
Remove six nuts (E) from engine exhaust
mounting studs on turbine housing.
TA2936S6
3-4 Change 1
Back to Top
