TM-9-3990-260-14-P

CONTAINER ROLL-IN/OUT PLATFORM (CROP) MODEL M3 AND MODEL M3A1

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2001

TM-9-3990-260-14-P - Page 273 of 306

TM 9-3990-260-14&P

APPENDIX I

TOOL IDENTIFICATION LIST

1-1.

INTRODUCTION.

This appendix is a list of tools used to repair the Container Roll-In/Out Platform (CROP). This list is arranged in

the order of the tasks and shows the nomenclature and National Stock Number (NSN). The index number corre-

sponds to the index number found in the task box of the maintenance procedure. Table 1-1 consists of the Tool

Identification List for both CROPs.

1-2.

EXPLANATION OF COLUMNS.

a.

Column (1) - Tool or Test Equipment Reference Code.

This number is assigned to the

entry in the listing and is referenced in the narrative task box to identify the material e.g., Tool Kit, General

Mechanic's: Automotive (Item 5, Appendix I).

b.

Column (2)

- Maintenance Level.

This column identifies the lowest level of maintenance that

requires the listed tools.

C

Operator

O

Unit Maintenance

F

Direct Support Maintenance

H

General Support Maintenance

c.

Column (3) - Nomenclature.

Indicates the federal item name and, if required, a description to

identify the item.

d.

Column (4) - National Stock Number.

This is the National Stock Number assigned to the

item; use it to request or requisition the item.

e.

Column (5) - Tool Number.

This is the vendor number assigned to the item.

f.

Column (6) - Reference.

This column lists the supply catalog that the tool is located in.

I-1