TM-9-3990-260-14-P

CONTAINER ROLL-IN/OUT PLATFORM (CROP) MODEL M3 AND MODEL M3A1

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2001

TM-9-3990-260-14-P - Page 277 of 306

TM 9-3990-260-14&P

Section III. LUBRICATION TABLE

LUBRICATION

POINT

CAPACITIES

EXPECTED TEMPERATURE

-25°F to +14°F

+14°F to 120°F

(-32°C to -10°C)

(-10°C to +49°C)

INTERVALS

Twistlock Assemblies

As Reqd.

GREASE AUTOMOTIVE

AND ARTILLERY

MIL-G-I0924

ALL TEMPERATURES

Front Pin Assemblies

As Reqd.

GREASE AUTOMOTIVE

AND ARTILLERY

MIL-G-I0924

ALL TEMPERATURES

S –Semiannually

Roller Pin Assemblies

As Reqd.

GREASE AUTOMOTIVE

AND ARTILLERY

MIL-G-I0924

ALL TEMPERATURES

Bracing Mechanism

Assemblies

As Reqd.

GREASE AUTOMOTIVE

AND ARTILLERY

MIL-G-l 0924

ALL TEMPERATURES

NOTES-

1.

Twistlock Assemblies: Purging of lubricant. When using a grease gun, apply grease to the fitting until

clean grease squeezes out of the part being lubricated. Wipe up excess grease.

2.

Front Pin Assemblies: Apply light coat of GAA grease to smooth tapered surfaces only. Do not apply

grease to threads.

3.

Roller Pin Assemblies: Apply GAA grease to roller pin assembly.

4.

Bracing Mechanisms: Apply GAA to threads only.

J-3