TM-9-3990-260-14-P

CONTAINER ROLL-IN/OUT PLATFORM (CROP) MODEL M3 AND MODEL M3A1

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2001

TM-9-3990-260-14-P - Page 279 of 306

TM 9-3990-260-14&P

APPENDIX K

M3A1 CROP LUBRICATION INSTRUCTIONS

Section I.

LUBRICATION REQUIREMENTS

K-1.

SCOPE.

This appendix gives lubrication requirements for the Container Roll-In/Out Platform (CROP) M3A1, which is

the responsibility of the operator/crew.

K-2.

GENERAL LUBRICATION INSTRUCTIONS.

a.

Intervals.

Intervals are based on normal operation. Change the interval if lubricants are contami-

nated or if operating the M3A1 CROP under adverse operating conditions. Intervals are based on time.

b.

Lubricate After Fording.

If fording occurs, lubricate all fittings below fording depth.

c.

Localized Views.

A reference to the appropriate localized view is given after all lubrication

entries.

d.

Warranty Hard Time Statement.

For equipment under manufacturer's warranty, hard time

intervals shall be followed. Intervals shall be shortened if lubricants are known to be contaminated.

e.

Lubrication Interval Symbols.

The following lubrication interval symbols used are:

S- Semiannually

L-Loading

K-1