TM-9-3990-260-14-P

CONTAINER ROLL-IN/OUT PLATFORM (CROP) MODEL M3 AND MODEL M3A1

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)

JULY 2001

TM-9-3990-260-14-P - Page 281 of 306

TM 9-3990-260-14&P

Section III. LUBRICATION TABLE

LUBRICATION

POINT

CAPACITIES

EXPECTED TEMPERATURE

25°F to +14°F

+14°F to 120°F

(-32°C to -10°C)

(-10°C to +49°C)

INTERVALS

A-frame Locking Pin and

Locking Pin Hole

As Reqd.

GREASE AUTOMOTIVE

AND ARTILLERY

MIL-G-IO924

ALL TEMPERATURES

Twistlock Assemblies

As Reqd.

GREASE AUTOMOTIVE

AND ARTILLERY

MIL-G-IO924

ALL TEMPERATURES

S - Semiannually

Roller Axle Assemblies

As Reqd.

GREASE AUTOMOTIVE

AND ARTILLERY

MIL-G-IO924

ALL TEMPERATURES

Bail Bar

As Reqd.

GREASE AUTOMOTIVE

AND ARTILLERY

MIL-G-IO924

ALL TEMPERATURES

L - Loading

NOTES

1.

A-frame Locking Pin and Locking Pin Hole: Apply light coat of GAA grease to smooth tapered surfaces

only. DO NOT apply grease to threads.

2.

Twistlock Assemblies: Purging of lubricant. When using a grease gun, apply grease to the fitting until

clean grease squeezes out of the part being lubricated. Wipe up excess grease.

3.

Roller Axle Assemblies: Apply GAA grease to roller axles.

4.

Bail Bar: Apply GAA grease to middle of bail bar.

K-3