TM-9-6920-430-14
COOLANT RECHARGING UNIT, TRAINING GUIDED MISSILE SYSTEM M80 AND CHARGER, BATTERY PP-7309/T
TECHNICAL MANUAL; OPERATOR’S AND ORGANIZATIONAL DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL
AUGUST 1980
TM-9-6920-430-14 - Page 41 of 180
TM 9-6920-430-14
NOTE
Perform step (f) below if hose is not connected to GPU; otherwise proceed
to step (g). The hose end having the shorter chain is connected to the GPU
outlet fitting (17).
f. Remove protective cap (16) from the GPU outlet fitting (17), and the protective
plug from the end of the GPU outlet flexible hose. Connect that end of the hose to the
GPU fitting (17) using a 9/16-inch wrench to tighten. Attach the safety chain to the GPU
eyebolt (18).
g. Remove the protective plug from the other end of the outlet flexible hose, and
thread the hose fitting to the trainer adapter (19) using a l/2-inch wrench to hold and a
9/16-inch wrench to tighten. Wrap the chain around the front end of the launch tube and
latch the chain lock to a chain link.
Change 3
2-15
Back to Top
