PS Magazine - AUGUST 1976
PS, The Preventative Maintenance Monthly
ISSUE 285
AUGUST 1976
i
Make sure it's installed the
right way with the slaNt cuts on
the inside of The fork angled
down.
(If it's put in with the slant
Ezts angLed Up, the hanger wiLL
bind and break if yoU eLevate The
gUn more than a few degrees.)
telescopE, raIse aNd tie the haNger
assembly TemporarIly In That
PosItioN±
(If yoU Let it dangLe
down± it²LL get crUshed if the gUn is
eLevated³´
²he h³aded Pin that attaches
the bottom of the haNger to tHe
teLescope musT be held i´ place
with a cotTer pinµ
(If the cotter pin
is not thereµ the headed pin wiLL
sLide oUt of the hanger when the
gUn is raised and the hanger wiLL
get damaged¶´
±
²he headed piN must be put in
so The coTTer eNd is cLosesT to The
TeLescope¶
(·f it²s pUt in so the
cotter pin faces toward the
gUn/ LaUncher± the hanger can get
damag¸d.
I
PUT COt±ER
PIN NEXt
±O tELeSCOPE
Back to Top Back to Top
