PS Magazine - SEPTEMBER 1978
PS, The Preventative Maintenance Monthly
ISSUE 310
SEPTEMBER 1978
I
·\
l.
EASY, WHeN yOU
sTRaIGht±n
THE
5PLIt±eR/
'
To straighten i±, remove thE
chute adapter, drive and inner
drum asseMbly. File of any
burrs. Go easy when you try to
straigh²en it. It breaks. It should
be c³ntered between the helix o´
the outer drum and be positioned
1/8 incH to 3/16 inch µom tHe
vanes o´ the inner druM.
·SprOCK²³S
keep the sprocKeTs high on your
´M
lisT. Damaged SprocKets maKe
fr aMmo Fe±ing probleMs²
³
´procKeT Teeth caN't be Below
Minimum WIdTh. µhey must noT
Hav¶e bURRs, Chips or raised Me·aL¸¹
º» ¼hEy do, ½le ¾em smooTh.
·
µhe Teeth are made o» ¿ard
MeTal, and YouÀll need timÁ anÂ
ÃusCle To smooth TheM ouT ÄÅÆ
µ¶lUBricA³iON
.
µo checK on ÇheThe
ThÈ ÉSur»aÊes o» The inner aËd oÌÍer drum need
lube, looK fr shinY areasÎÏ
±
.
Ðhe lUbe coVeriÑg on TÒe sur»aces is a ±Ull, ±arK GraÓ º» You see shiny
4
areas, sprAy them witH just enou¶h lube to coVer the exposed sur·ce.
Don't over-l¸be ¹
you'll make a Mush that'll slow ammo ºow»
¸o¹Quº »¼m½¸º¹
s¾¿ay ÀhÁny
aÂaÀ ÃÁghÄÅy
wÁÄh ÅÆbÇ
ÈsÈ
9150-00²
³´2µ9309
When you adJust the torque limiter as it tells you on pages 3¼32 and
3¼33 o´ T½ 9¼1090-203-12 (¾an 76), keep the torque on the high side, 30
lb¿in.
Then, check the torque limiter
¶
or
6
times in each direction to be sure
it's not binding. One or 2 swings mÀght not be enough, because it could be
smooth and then bind on the 3rd or so swing.
IÁ the torque Limiter doeS't check out exchange it Ãr a good one.
ÉhÇÊk ÄËÌÍÇ ÅÁÎÁÄÏ¿
fË¿ bÐndÁÑG
·
ÒX ÓÔ ÕÖD
Y×Ø'ÙÚ
rig¸¹
ÛÜÝÞ
º»
ßàáâãäåæç
\
Back to Top Back to Top
