PS Magazine - TB 43-PS-438

PS Magazine - TB 43-PS-438 - Page 29 of 33

Hold the pLug upright so you can

see the deteNt ball. Press the

ball Into the pLug housing wiTh t²e

smaLL tIp screwdrIver³

MAY 89

´he plug lockIng pµns wiLL hoLd

the BaLl out of the way as you

tiLt the pLUg anD let the cyLinder

slide out Into your hand¶

Set the plug on a fLat sURace·

Squeeze the locking pins Back

onto the plug. ¸he dete¹t BaLL

wiLl drop to the Bottom of the pLug³

(

´iºt the plug and catch the ball

and the spring connected Locking

pins in your hand¶ Put items in a

safe place sO they won't get lost³

»ever remove the spring from pins¶

MAY 89

¸urn the p¼Ug upside

down and use the

screwDrIve½ tIp to push

out the retaIning rIng,

tumBLer shield and

cyLinder shIeLd³

ALl pa¾s and the case can now

Be inspected¿ cleaned and ½epLaceD

as necessaryÀ ÁemoVe corrosion

with the wIre Brush¶

Tutorials