<
ibration causes the air compressor oil suPply
h
.
on your scoop loader to
rub against the fUel sediment bowl± This wears a hole in the hose²
You can put a stop to this by re-routing the hose² You'll need:
Item
NSN4730·
Elbow, 1±-in pipe to
5/²6"in Tube
00-288±9440
AND
EI³HER
Elbow, street, ´-µn
00±053±0266
OR
NippLe, close 1±-in
00-230±1996
Elbow, ´-in pipe
01-171²1934
HERE'S HOW:
m
0
50
Screw µn the pipe To tUbe elbow
in the compressor. Make sure
the openµng points down¶ ·se ³efLon
tape,
NSN 8030±00±889³3534,
o¸ the
threads of all pipe fittings to geT a
good seal
AUG 89
Screw the ´-in streeT elbow in¹
To The exºstºnG Fº»inG on The en¼
Gine bloCK½ OR screw the Close nºP¾
P¿e And The PiPe elbow inTo the Fi»inG
on the enGine block
Be sure The elbow is horizontAl
and The oPen end PoinTs Toward
The comPressor
lºne you re-
Warehouse Tractor Radiator Cap
W
hen it comes to the radIator cap,
TM 10³3930³633´20µ For the Clark
CTE¶40 warehouse tractor Is only halF
right²
That·s because replacement
radiators use a difFerent cap than the
origInal radiators¸
BeFOre orderIng a cap¹ look at the
radiator on your tractorº The orIginal
·se caP
À
NSN 2930·
00´ 772µ5768¶
with rounded
radiator
radiator has a rounded top and Is 22
»
/
»
¼¶In wIde¸ ½t uses cap¹
Nsn
2930¶00¾772¶
5¿68¸
Replacement radIators have a Flat toP aNd are 20ÀÁ¼¶In wIde These use caP¹
NsN
2930¶00³358¾5960Ã
AUG 89
51