PS Magazine - TB 43-PS-513
PS, The Preventative Maintenance Monthly
ISSUE 513
AUGUST 1995
E
r alL
:
ts size
±²
tRengTh, the engine
on that M9±2-seRIes ammo caRRieR can
stiLl be hurt If you don'T waTch your sTep,
mechanics.
A carelessly placed fooT will snap oF
The engine²s cooLant hIgh tempeRature
sw³tch and coolanT TemperaTure tRans´
mitteRµ ¶hen· They eITher don¸t woRk or
They sTarT giving you f¹lse readings.
You can pRevenT thIs damage By T¹k´
ing a few minuTes To instaLl some pRe´
made guaRdsº HeRe are the parts you»ll
need:
Item
I
NSN
ProTecTive coveR
5930-01±226-349²
Lock washe± (A)
53²0-³´407 ·95µ
locK washer ²B³
53¶(¸¹-5º5
Mach´ne boµt
53»¼³-¹¹6½826
F¶aT washer
53¾ ¿8À´4058
nu
53²0-³±905ÁÂ76¹
Wire Tie strap
5975±Â0-899¼Ã6»
You¼ll need to oRder two of The p½o´
TecTive covers¾ ¶he oTher NS¿s bring
10±
of each item.
Here»s Àow to insTalL the covers:
².
Detach the loop clamp that connects
The engIne oIL dIpsTIcK to the cooLant
manIÁoLd. ÂEave the loop clamp on the
dIpsTicK and Toss the hardwaReº
2³
PLace a proteCtive cover over the
cooÃant switch and atTach it using the
Two exisTing bolTs and Two new LocK
washeRs (A).
3´
Attach
the dIpsTick
loop clamp
to The
p½otective
coveR wiTh
machIne
bolT, flat
washeR,
LockÄ
wasÀer
(B),
and nuT¾
4µ
¶oss The
loop cLamp
holding Åhe
wI½ing haRÆ
ness ThaT runs behind ThE coolanT swiTch
and ½eplace iT with two wiRe Tie sTRapsº
5¶
Place a second pRoTecTive cover over
the engÇne cooÈant temperature trans´
mItterÉ Secure it in pLace usIng the
two eXisTing bolTs and Two new locK
washers (AÊË
6·
Secure The TransmITTer wi½e to The LefT
sIde oÁ the pRoTectIve cover using a wIre
tie sTrap.
PS IJÅ
²Æ
AUG
ÇÄ
Back to Top Back to Top
