MWO-5-2350-262-35-4

ARMORED COMBAT EARTHMOVER (ACE), M9

MODIFICATION WORK ORDER

MWO-5-2350-262-35-4 - Page 162 of 207

MWO 5--2350--262--35--4

5--27

SECTION VII MODIFICATION COMPLETION

NOTE

After all HDC modifications have been made, a thorough check should be made

throughout the vehicle to ensure that all vehicle components that were temporarily moved

to facilitate the modification have been re--installed, and that the vehicle is ready for

normal operation.

NOTE

Steps a through e below apply to figures in M9 ACE TM 5--2350--262 series of technical manuals.

a.

Secure previously moved switch panel (Driver’s Instrument Panel) in front area of driver’s compartment

per TM 5--2350--262--20--1.

b.

Reinstall driver’s seat using four new self--locking screws, B1821BH038C100L. Refer to TM

5--2350--262--20--2.

c.

Reinstall parking brake lever using two new self--locking nuts, MS17829--5C. Refer to TM

5--2350--262--20--1.

d.

Tighten two mounting screws on umbilical cable disconnect bracket that were not tightened in Chapter 2,

Section IV, step g.

e.

Connect vehicle battery power per TM 5--2350--262--20--1, Battery Cable Replacement, Negative Cables

Connect.