MWO-5-2350-262-35-4

ARMORED COMBAT EARTHMOVER (ACE), M9

MODIFICATION WORK ORDER

MWO-5-2350-262-35-4 - Page 157 of 207

MWO 5--2350--262--35--4

5--22

SECTION VI ROUTING AND ELECTRICAL CONNECTION OF LOWER

CABLE ASSEMBLY W3

NOTE

Steps a and b below apply to Figure 5--14. Reference should also be made to FO 5--5.

a.

Cable assembly W3, Figure 5--14, (2), is routed down the left lower side of ejector bowl and down behind

left main manifold as shown in Figure 5--14. Upper cable assembly W2 (1) is routed toward the primary

manifold assembly just above the left main manifold.

b.

Route three branches of cable W3 to proper areas on underside of vehicle. One main branch of W3

cable interfaces with components on left underside of vehicle while other main branch of cable W3

interfaces with components on right underside of vehicle. There are three smaller branches on each W3

main cable branches.

Figure 5--14. Lower Cable Assembly W3 Routing