MWO-5-2350-262-35-4
ARMORED COMBAT EARTHMOVER (ACE), M9
MODIFICATION WORK ORDER
MWO-5-2350-262-35-4 - Page 97 of 207
MWO 5--2350--262--35--4
3--68
SECTION V MODIFICATION OF ACCESS COVER
WARNING
Make sure sharp edges and burrs are removed after modifying access cover. Serious
injury could result if finished surfaces are not smooth.
NOTE
Steps a through c apply to Figures 3--44 and 3--45.
a.
Remove three self--locking bolts (3), three flat washers (2), and access cover, 12332229, (1) from right
side of bowl area as shown in Figure 3--44. Discard self--locking bolts but retain flat washers. Refer to
TM 5--2350--262--20--1, Hull Access Covers and Plug Replacement and Repair procedure.
Figure 3--44. Location of Access Cover
Back to Top
