TB-9-2300-378-14
M48 & M60 SERIES VEHICLES
TECHNICAL BULLETIN; AIR INDUCTION SYSTEM MAINTENANCE
SEPTEMBER 1985
TB-9-2300-378-14 - Page 184 of 296
TB 9-2300-378-14
h.
Dust Detector Warning Light Box Assembly Replacement (M728) (Fig. 6-25).
(1) Removal.
(a)
Disconnect harness connector from dust detector warning light box
assembly.
(b)
Remove two screws, nuts and lockwashers securing bracket and dust
detector warning light box assembly to gage indicator panel support bracket.
(c)
Separate dust detector warning light box assembly from bracket.
(2) Installation
(a)
Position bracket
indicator support
and dust detector warning light box assembly on gage
bracket.
(b)
Secure dust detector warning light box assembly and bracket to gage
indicator support bracket with two screws, lockwashers and nuts.
CAUTION
Do not overtighten harness connector.
connector may result, if overtightened.
(c)
Connect harness connector to dust detector
Damage to
warning light box assembly.
6-62
Back to Top
