TB 9-2300-378-14
i.
Dust Detector Warning Light Box Assembly Replacement (M48A5 AVLB, M60A1 AVLB)
(Fig. 6-26).
(1) Removal
(a)
(b)
(c)
If
(d)
(e)
Disconnect harness connector from dust detector warning light box
assembly.
Remove
two
screws,
nuts and lockwashers securing bracket and dust
detector warning light box assembly to support bracket.
Remove dust detector warning light box assembly from support bracket.
NOTE
support bracket is to be replaced go to step (d).
Remove two screws and lockwashers securing support bracket to launcher
basket.
Remove bracket.
(2) Installation
If
(a)
NOTE
support bracket was removed go to step (a), if not, go to step
Position support bracket on launcher basket and secure using
(b).
two screws and
lockwashers.
(b)
Position bracket and dust detector warning light box assembly on support
bracket and secure using two screws, lockwashers and nuts.
CAUTION
Do not overtighten harness connector. Damage to connector
may result if overtightened.
(c)
Connect harness connector to dust detector warning light box
assembly.
6-64