TB-9-2320-279-13-P-3
TECHNICAL BULLETIN; TANKER ARMOR MODULE KIT
OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND INSTALLATION INSTRUCTIONS)
JANUARY 2007
TB-9-2320-279-13-P-3 - Page 86 of 396
TB 9-2320-279-13&P-3
0018-2
0018
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may cause injury or death to personnel.
1. Remove screw (1), lockwasher (2), and washer (3) from left upper side panel assembly (4) and rear panel
assembly (5). Discard lockwasher.
2. Remove four screws (6), lockwashers (7), washers (8) from left upper side panel assembly (4) and left
lower side panel assembly (9). Discard lockwashers.
NOTE
NOTE
Left upper side panel assembly weighs 165 lbs (75 kg).
3. Attach sling and lifting device to left upper side panel assembly (4).
4. Using lifting device, remove left upper side panel assembly (4) from rear panel assembly (5) and left
lower side panel assembly (9).
END OF TASK
Back to Top
