TB-9-2320-279-13-P-3
TECHNICAL BULLETIN; TANKER ARMOR MODULE KIT
OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND INSTALLATION INSTRUCTIONS)
JANUARY 2007
TB-9-2320-279-13-P-3 - Page 92 of 396
TB 9-2320-279-13&P-3
0019-2
0019
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may cause injury or death to personnel.
1. Remove five screws (1), lockwashers (2), and washers (3) from right upper side panel assembly (4) and
rear panel assembly (5). Discard lockwashers.
2. Remove four screws (6), lockwashers (7), and washers (8) from right upper side panel assembly (4) and
right lower side panel assembly (9). Discard lockwashers.
NOTE
NOTE
Right upper side panel assembly weighs 170 lbs (77 kg).
3. Attach sling and lifting device to right upper side panel assembly (4).
4. Using lifting device remove right upper side panel assembly (4) from rear panel assembly (5) and right
lower side panel assembly (9).
END OF TASK
Back to Top
