TB-9-2320-279-13-P-3
TECHNICAL BULLETIN; TANKER ARMOR MODULE KIT
OPERATOR’S AND FIELD LEVEL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND INSTALLATION INSTRUCTIONS)
JANUARY 2007
TB-9-2320-279-13-P-3 - Page 95 of 396
TB 9-2320-279-13&P-3
0019-5
0019
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may cause injury or death to personnel.
NOTE
NOTE
Right upper side panel assembly weighs 170 lbs (77 kg).
1. Attach sling and lifting device to right upper side panel assembly (4).
2. Using lifting device, position right upper side panel assembly (4) on right lower side panel assembly (9)
and rear panel assembly (5).
3. Install right upper side panel assembly (4) to right lower side panel assembly (9) with four washers (8),
lockwashers (7), and screws (6). Do not tighten screws at this time.
4. Install five washers (3), lockwashers (2), and screws (1) to right upper side panel assembly (4) and rear
panel assembly (5). Do not tighten screws at this time.
5. Tighten four screws (6) to 60 lb-ft. (81 N•m)
6. Tighten five screws (1) to 60 lb-ft. (81 N•m).
END OF TASK
Back to Top
