TB-9-2320-280-35-12
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR EPLRS NETWORK MANAGER VEHICLE WITH AMTECH TOP
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-12 - Page 122 of 162
TB 9-2320-280-35-12
5-94
Section XLVI. PASSENGER-SIDE MULTI-NET RACK CABLE INSTALLATION
46-1.
Locate, mark, and drill two 0.281-in. diameter holes (12) in multi-net rack (3).
46-2.
Locate, mark, and drill two 0.281-in. diameter holes (13) in multi-net rack (3).
46-3.
Connect battery alarm box power cable (10) to battery alarm box (9).
46-4.
Route battery alarm box power cable (10) along multi-net rack (3) lower shelf to curbside footwell.
46-5.
Secure battery alarm box power cable (10) with two clamps (11), screws (5), lockwashers (4), and
nuts (8).
46-6.
Route EPLRS antenna cable (1) and INC-EPUU cable (2) along underside of multi-net rack (3)
upper shelf.
46-7.
Secure EPLRS antenna cable (1) and INC-EPUU cable (2) to multi-net rack (3) with five clamps (7),
screws (5), lockwashers (4), and nuts (8).
1
7
2
3
4
5
6
7
8
9
10
11
12
8
8
4
5
4
5
1.125
2.5
7.5
13
4. LOCKWASHER – MS45904-68 – QTY. 7
5. SCREW – MS90725-6 – QTY. 7
7. LOOP CLAMP – 3225T48 – QTY. 5
8. NUT – MS51967-2 – QTY. 7
10. BATTERY ALARM BOX CABLE – A3265596 – QTY. 1
11. LOOP CLAMP – MS21333-102 – QTY. 2
Figure 5-133.
~
Back to Top
