TB-9-2320-280-35-12
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR EPLRS NETWORK MANAGER VEHICLE WITH AMTECH TOP
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-12 - Page 32 of 162
TB 9-2320-280-35-12
5-8
3-6.
Remove paint from vicinity of three mounting slots (7) on integrated rack (1).
3-7.
Apply anti-seize compound to vicinity of three mounting slots (7) on integrated rack (1) as required.
Figure 5-10.
1
7
7
NOTE
Do not install mounting hardware on top of integrated rack at this
time. Not installing this hardware leaves the integrated rack free
to pivot to assist in routing cabling. Secure rack only after all
cabling has been routed.
3-8.
Mount integrated rack (1) to existing radio rack mount (10) with capscrew (12), washer (11),
lockwasher (9), and nut (8). Repeat for opposite side. Do not tighten capscrew (12).
Figure 5-11.
8
9
10
12
11
8. NUT – MS35649-2382 – QTY. 2
9. LOCKWASHER – MS35338-46 – QTY. 2
11. WASHER – 2436163 – QTY. 2
12. CAPSCREW – B1821AH038C225N – QTY. 2
~
1
Back to Top
