TB-9-2320-280-35-12
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR EPLRS NETWORK MANAGER VEHICLE WITH AMTECH TOP
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-12 - Page 77 of 162
TB 9-2320-280-35-12
5-49
Figure 5-70.
27-10.
Install upper half of antenna offset mount (15) on lower half of antenna mount (2) with four
screws (16), eight washers (5), four lockwashers (4), and four nuts (3).
NOTE
Ensure holes in antenna base and grommet are aligned with
weldnut holes in mounting bracket.
27-11.
Install antenna (22) and gasket (21) on top of antenna offset mount (15) with four screws (14),
lockwashers (24), and washers (23).
NOTE
Prior to securing antenna ground lead, enlarge hole on offset
mount with 9/32-in. drill bit to allow 1/4-in. screw to fit.
27-12.
Secure antenna ground lead (19) to lower half of antenna mount (2) with screw (17), two
lockwashers (18), and nut (20).
15
22
14
17
18
18
19
20
21
23
24
5
5
4
3
2
16
~
3. NUT – MS35690-610 – QTY. 4
4. LOCKWASHER – MS35338-141 – QTY. 4
5. WASHER – MS15795-814 – QTY. 8
14. CAPSCREW – MS35307-365 – QTY. 4
15. OFFSET MOUNT – A3046219 – QTY. 1
16. SCREW – MS90725-62 – QTY. 4
17. SCREW – MS35207-263 – QTY. 1
18. LOCKWASHER – MS45904-68 – QTY. 2
20. NUT – MS35650-302 – QTY. 1
21. GASKET – A3013655-1 – QTY. 1
22. ANTENNA – A3017889-2 – QTY. 1
23. WASHER – 2436163 – QTY. 4
24. LOCKWASHER – MS45904-72 – QTY. 4
Back to Top
