TB-9-2320-280-35-12
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR EPLRS NETWORK MANAGER VEHICLE WITH AMTECH TOP
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-12 - Page 85 of 162
TB 9-2320-280-35-12
5-57
Figure 5-83.
~
30-2.
Using QEAM rack (4) as template, locate, mark, and drill four 0.344-in. diameter holes (9) in roof of
vehicle (14).
30-3.
Mark location for four QEAM spacers (8) and apply RTV sealant to marked areas (10).
NOTE
Allow RTV to cure for 30 minutes.
30-4.
Press four spacers (8) onto roof of vehicle (14).
30-5.
Position QEAM rack (4) over holes in four spacers (8).
30-6.
Apply RTV to four bolt holes (9) and insert four bolts (6) and washers (7) into QEAM carrier.
30-7.
Apply RTV to one side of four washers (11). Press washers (11) in place.
30-8.
Install lockwasher (12) and nut (13).
6
7
4
8
9
10
11
12
13
14
6. SCREW – B1821BH031C300N – QTY. 4
7. WASHER – 120393 – QTY. 4
8. QEAM SPACER (PART OF A3265715) – QTY. 4
11. WASHER – 120393 – QTY. 4
12. LOCKWASHER – MS45904-72 – QTY. 4
13. NUT – MS51967-6 – QTY. 4
~
Back to Top
