TB-9-2320-280-35-12
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR EPLRS NETWORK MANAGER VEHICLE WITH AMTECH TOP
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-12 - Page 90 of 162
TB 9-2320-280-35-12
5-62
Figure 5-89.
12. LOOP CLAMP – MS21333-69 – QTY. 3
13. SELF-TAPPING SCREW – 9421073 – QTY. 2
15. NUT – MS35650-302 – QTY. 1
17. SCREW – MS35224-65 – QTY. 1
24. TIE STRAP – MS3367-1-0 – QTY. A/R
29. SCREW – MS90725-30 – QTY. 4
30. WASHER – MS27183-12 – QTY. 4
27
6
28
29
31
32
35
34
33
14
15
16
17
12
18
19
20
21
22
23
24
18
25
18
25
26
1
30
13
31-8.
Route two antenna cables (1) and (6) along front wheelwell seam (16) and along front (14),
intermediate (35), and rear (33) cargo bed supports. Secure with two self-tapping screws (13), loop
clamps (12), screw (17), loop clamp (12), nut (15), and existing self-tapping screw (18) and loop
clamp (33).
31-9.
Route antenna cable (1) along existing taillight wiring harness (44) with two existing loop clamps
(27) and (26), self-tapping screws (18), and lockwashers (25).
31-10.
Route antenna cable (1) to antenna base (32) with existing loop clamp (19), nut (23), lockwasher (22),
washer (21), and screw (20).
31-11.
Attach antenna cable (1) to antenna base (32).
31-12.
Coil excess antenna cable (1) and secure to inside of taillight closeout cover with tiedown strap (24).
31-13.
Attach cover plate (31) to offset antenna mount (28) with four screws (29) and four washers (30).
12
Back to Top
