TB-9-2320-280-35-12
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR EPLRS NETWORK MANAGER VEHICLE WITH AMTECH TOP
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-12 - Page 81 of 162
TB 9-2320-280-35-12
5-53
28-10.
Install upper half of antenna offset mount (18) to antenna support (1) with four screws (23), eight
washers (3), four lockwashers (5), and four nuts (6).
NOTE
Ensure holes in antenna base are aligned with weldnut holes in
mounting bracket.
28-11.
Install antenna (24) and gasket (17) on antenna offset mount (18) and secure with
four screws (14), lockwashers (15), and washers (16).
NOTE
Prior to securing antenna ground lead, enlarge hole on offset
mount with 9/32-in. drill bit to allow 1/4-in. screw to fit.
28-12.
Secure antenna ground lead (20) to antenna offset mount (18) with screw (22), two
lockwashers (21), and nut (19).
14
15
16
18
17
19
20
21
21
1
22
6
5
3
3
23
24
~
3. WASHER – MS15795-814 – QTY. 8
5. LOCKWASHER – MS35338-141 – QTY. 4
6. NUT – MS35690-610 – QTY. 4
14. CAPSCREW – MS35307-365 – QTY. 4
15. LOCKWASHER – MS45904-72 – QTY. 4
16. WASHER – 2436163 – QTY. 8
17. GASKET – A3013655-1 – QTY. 1
18. OFFSET MOUNT – A3046219 – QTY. 1
19. NUT – MS35650-302 – QTY. 1
21. LOCKWASHER – MS45904-68 – QTY. 2
22. SCREW – MS35207-263 – QTY. 1
23. SCREW – MS90725-62 – QTY. 4
24. ANTENNA – A3017899-2 – QTY. 1
Figure 5-78.
Back to Top
