TB-9-2320-280-35-12
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR EPLRS NETWORK MANAGER VEHICLE WITH AMTECH TOP
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-12 - Page 80 of 162
TB 9-2320-280-35-12
5-52
28-3.
Install 4.250-in. piece of plastic-edge grommet (9) in existing hole (8) of right-side rear wheelhouse (7).
28-4.
Temporarily secure antenna support (1) and angle plate (2) to right-side rear wheelhouse (7) with three
screws (4) and three nuts (6).
28-5.
Using antenna support (1) as template, locate, mark, and drill two 0.406-in. diameter holes (10) in
right-side rear wheelhouse (7).
28-6.
Remove antenna support (1) and angle plate (2) from right-side rear wheelhouse (7).
28-7.
Install 4.250-in. piece of plastic-edge grommet (9) in hole (11) of antenna support (1).
28-8.
Secure angle plate (2) and antenna support (1) to right-side rear wheelhouse (7) with backing
plate (13), three screws (4), six washers (3), three lockwashers (5), and three nuts (6).
28-9.
Secure antenna support (1) to right-side rear wheelhouse (7) with plate (12), two screws (4), four
washers (3), two lockwashers (5), and two nuts (6).
4. SCREW – MS90725-64 – QTY. 3
6. NUT – MS35690-610 – QTY. 3
3. WASHER – MS15795-814 – QTY. 10
4. SCREW – MS90725-64 – QTY. 2
5. LOCKWASHER – MS35338-141 – QTY. 5
6. NUT – MS35690-610 – QTY. 2
12. PLATE – A3103784 – QTY. 1
13. BACKING PLATE – A3046222 – QTY. 1
Figure 5-75.
Figure 5-74.
7
1
8
9
2
4
6
10
Figure 5-76.
1
11
9
Figure 5-77.
5
2
13
3
3
5
6
3
4
4
1
12
3
7
6
~
~
9. GROMMET – MS21266-4N – QTY. A/R
9. GROMMET – MS21266-4N – QTY. A/R
Back to Top
