TB-9-2320-280-35-12
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR EPLRS NETWORK MANAGER VEHICLE WITH AMTECH TOP
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-12 - Page 79 of 162
TB 9-2320-280-35-12
5-51
1. ANTENNA SUPPORT – A3103782 – QTY. 1
2. PLATE (ANGLED) – A3103740 – QTY. 1
3. WASHER – MS15795-814 – QTY. 8
4. SCREW – MS90725-64 – QTY. 4
5. LOCKWASHER – MS35338-141 – QTY. 4
6. NUT – MS35690-610 – QTY. 4
Figure 5-73.
Figure 5-72.
Section XXVIII. RIGHT-SIDE SINCGARS ANTENNA INSTALLATION
28-1.
Install angle plate (2) on antenna support (1) with four screws (4), eight washers (3), four
lockwashers (5), and four nuts (6).
28-2.
Using angle plate (2) as template, locate, mark, and drill three 0.406-in. diameter holes on
right-side rear wheelhouse (7).
1
2
2
7
3
4
3
5
6
~
Back to Top
