TB-9-2320-280-35-12
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR EPLRS NETWORK MANAGER VEHICLE WITH AMTECH TOP
OCTOBER 2006
CHANGE 1
TB-9-2320-280-35-12 - Page 91 of 162
TB 9-2320-280-35-12
5-63
49. TIE STRAP – MS3367-1-0 – QTY. A/R
51. SCREW – MS90725-30 – QTY. 4
52. WASHER
– MS27183-12 – QTY. 4
31-14.
Route antenna cable (6) along existing taillight wiring harness (44) on rear cargo bed support (33)
and secure with four existing loop clamps (45), (46), (47), (48), and existing self-tapping screws (40).
31-15.
Route antenna cable (6) along existing taillight wiring harness (44) on left-side frame rail with
three existing loop clamps (43), (42), and (48), and existing self-tapping screws (40) and lockwashers
(41).
31-16.
Route antenna cable (6) to antenna base (36) with existing loop clamp (37), screw (53),
lockwasher (38), and nut (39).
31-17.
Attach antenna cable (6) to antenna base (36).
31-18.
Coil excess antenna cable (6) and secure to inside of taillight closeout cover with tiedown
strap (49).
31-19.
Attach cover plate (50) to offset antenna mount (54) with four screws (51) and washers (52).
Figure 5-90.
36
37
38
39
40
41
42
43
45
44
46
47
6
48
33
41
48
51
49
50
52
40
53
54
~
Back to Top
