TB-9-2320-280-35-15
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11
SEPTEMBER 2006
TB-9-2320-280-35-15 - Page 27 of 168
TB 9-2320-280-35-15
5-3
Figure 5-3.
Figure 5-4.
6.624
24V REF
3.624
1
2
12V REF
1. TERMINAL BOARD – MS27212-3-8 – QTY. 1
3. TERMINAL BOARD COVER – 12480569-1 – QTY. 1
4. TERMINAL BOARD COVER – 12480569-2 – QTY. 1
6. TERMINAL BOARD COVER – MS18029-3S-2 – QTY. 1
Section IV. TERMINAL BOARD, COVER, AND LINK MODIFICATION
CAUTION
Do not cut raised sections of terminal board. Terminal board is not
usable if cut on raised section.
4-1.
Measure and cut terminal board (1) in two places (2). Remove burrs and sharp edges.
4-2.
Install five nut sleeves (5) in terminal board covers (3), (4), and (6) and secure with snaprings (7).
3
4
5
7
6
Back to Top
