TB-9-2320-280-35-15
TECHNICAL BULLETIN
INSTALLATION INSTRUCTIONS FOR RETRANSMISSION VEHICLE WITH AMTECH TOP FOR AN/VRC-92F, AN/UYK-128 (V)4, RT-1812, AN/VSQ-2 (V), AB-1386/U, DAGR, AN/PSN-11
SEPTEMBER 2006
TB-9-2320-280-35-15 - Page 29 of 168
TB 9-2320-280-35-15
5-5
Figure 5-6.
Section VI. ASSEMBLY OF CAB ENCLOSURE PANEL
6-1.
Install 12V terminal board (7) on enclosure panel (8) with two screws (1), lockwashers (2), and
nuts (6).
6-2.
Install 24V terminal board (5) on enclosure panel (8) with three screws (1), lockwashers (2), and
nuts (6).
6-3.
Enlarge two holes marked A in terminal board (3) to 0.196 in., and secure terminal board (3) to cab
enclosure panel (8) with two rivets (4).
1
1
2
6
7
6
2
8
3
4
5
1. SCREW – MS35206-230 – QTY. 5
2. LOCKWASHER – MS35338-41 – QTY. 5
3. TERMINAL BOARD – 12480570 – QTY. 1
4. BLIND RIVET – 12339355-1 – QTY. 2
6. NUT – MS35649-63 – QTY. 5
A
A
Back to Top
