TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 108 of 396

TB 9-2320-302-13&P-2

REAR CAB ARMOR REPLACEMENT - CONTINUED

0018 00

0018 00-2

REMOVAL

1.

Remove two nuts (6), lockwashers (8), washers (7), and set aside two rear cab lights (1) from rear cab armor frame (11).

Discard lockwashers.

2.

Remove four bolts (2), lockwashers (3), washers (4), and two brackets (5) from rear cab armor frame (11). Discard lock-

washers.

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Failure to follow this warning may cause injury or death to personnel.

3.

With assistance, remove two top rear cab armor panels (9) from rear cab armor frame (11).

4.

Remove emergency egress panel (10) (WP 0019 00).

5.

Remove three center support dividers (12) from rear cab armor frame (11).

6.

With assistance, remove three bottom rear cab armor panels (13) from rear cab armor frame (11).

7.

Remove eight nuts (14), lockwashers (15), washers (16), and two rear cab grab handles with adapter plates (17) from

rear cab armor frame (11). Discard lockwashers.

440-089

2,3,4

1

9

10

11

12

13

14,15,16

17

5

6,7,8