TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 110 of 396

TB 9-2320-302-13&P-2

REAR CAB ARMOR REPLACEMENT - CONTINUED

0018 00

0018 00-4

CLEANING AND INSPECTION

Clean and inspect all parts IAW

General Maintenance Instructions

(WP 0011 00).

INSTALLATION

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-

dure. Failure to follow this warning may cause injury or death to personnel.

1.

With assistance, install rear cab armor frame (11), nine

washers (20), and bolts (21) on rear cab armor frame

(11). Install nine washers (19) and new locknuts (18)

on inside rear cab.

2.

Install four washers (24) and bolts (25) on bottom of

rear cab armor frame (11). Install four washers (23)

and new locknuts (22) on bottom of inside rear cab.

440-025

22,23,24,25

18,19,20,21

11