TB-9-2320-302-13-P-2

CREW PROTECTION KIT PART 2 OF 3

TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST

JUNE 2007

TB-9-2320-302-13-P-2 - Page 247 of 396

ArmorWorks

1.) Remove bottom bolts from caution

light bracket

2. Align frame and insert bolts on with

washers and nuts and top of frame.

3.) Drill bottom holes using the frame as

a guide. Install 4 each of bolts,

washers and nuts.

* Note: On the top rail the A2 and A3

models differ in bolts. A2 9X1/4 - 20

Bolts, A3 use 3X1/4 bolts and 4X3/8 -

16 Bolts. The bottom Rail requires

same bolts– 4X5/16 bolts

4.) Add red exit strap to rear window.

5.) Wet the seal of back window that was

broken earlier with soapy water.

Place glass inside seal using a flat

head screwdriver to guide.

6.) Lock window in by tucking the bottom

of the seal

TB 9-2320-302-13&P-2

0038 00-35