TB-9-2320-302-13-P-2
CREW PROTECTION KIT PART 2 OF 3
TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2007
TB-9-2320-302-13-P-2 - Page 252 of 396
ArmorWorks
4.) Reconnect the work light connector that was removed in the earlier preparation
process.
OEM GRAB RAIL RE-INSTALLATION (DRIVER SIDE ONLY):
Install the OEM Grab Rail (removed
earlier during Vehicle Preparation) onto the
two 3/8” threaded studs on the Driver Side B-Pillar Armor Frame as shown.
Use
provided 3/8” flat washers, lock washers, and hex nuts to secure the Grab Rail to
the frame.
Repeat this installation procedure for the Passenger Side B-Pillar Armor.
Repeat this installation procedure for the Passenger Side B-Pillar Armor.
TB 9-2320-302-13&P-2
0038 00-40
Back to Top
