TB-9-2320-302-13-P-2
CREW PROTECTION KIT PART 2 OF 3
TECHNICAL BULLETIN; OPERATOR'S, UNIT AND DIRECT SUPPORT, MAINTENANCE MANUAL, INSTALLATION INSTRUCTIONS AND REPAIR PARTS AND SPECIAL TOOLS LIST
JUNE 2007
TB-9-2320-302-13-P-2 - Page 59 of 396
TB 9-2320-302-13&P-2
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0009 00
0009 00-13/(0009 00-14 Blank)
END OF WORK PACKAGE
10
Weekly
Front Sus-
pension
Inspect front suspension springs and
mounting hardware for cracks, breaks,
loose, or missing hardware and/or
shackles. Notify your supervisor of any
damage found.
Any cracks, breaks, loose hardware, or
damage to suspension springs is noted.
11
Weekly
Cab Mounts
Inspect cab mounts for evidence of dete-
rioration, over-compression, or loose
mounting hardware. Notify your super-
visor of any damage or looseness found.
12
Weekly
Wheels and
Wheel Rims
Inspect wheel lug nuts and wheel rim
bolts/nuts for looseness (e.g., polished
surface, rust, or minor cracks around
bolt and wheel mating surfaces). Notify
your supervisor of any looseness found.
Two or more studs or nuts are missing
from the same wheel.
13
Weekly
Crew Protec-
tion Kit
Mounting
Hardware
Check all armor kit mounting hardware
for loose or missing hardware. Notify
your supervisor of any loose or missing
mounting hardware found.
14
Weekly
Escape
Hatch
a. Ensure there is no damage to straps
and mounting hardware.
Escape hatch door will not latch closed
securely.
b.Inspect for damage to escape hatch
seal. Notify your supervisor of any
damage found.
15
Weekly
Door
Assemblies
Check both door assembly seals, hard-
ware, and door stops for damaged or
loose components. Notify your supervi-
sor of any damage found.
Door assembly is damaged, loose, miss-
ing, or mounting bolts are loose or miss-
ing.
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued.
Item
No.
Interval
Location
Procedure
Not Fully Mission
Capable If:
Item To
Check/
Service
Back to Top
